RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
Úprava čisté vody RO
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Elektrická energie komerčních systémů úpravy vody RO
Pro komerční čističku vody potřebuje 220-380V/50Hz/60Hz. Pro větší kapacitu, zejména pro průmyslový systém reverzní osmózy, potřebuje kvůli vysokotlakému čerpadlu 380V 50/60Hz. Pokud jde o váš komerční návrh stroje na filtraci vody s reverzní osmózou, zkontrolujeme vaši elektrickou dodávku a rozhodneme o opravě napájení. Máme také některé metody úspory energie ke snížení nákladů na elektřinu, nové technologie úpravy vody Chunke vám pomohou snížit vaše největší náklady na provoz systému.
Před nákupem komerčního systému čištění vody byste měli vědět:
1. Kapacita výroby čisté vody (l/den, l/hod, GPD).
2. Zpráva o TDS napájecí vody a analýze surové vody (zabraňte problémům se znečištěním a usazováním vodního kamene)
3. Železo a mangan musí být odstraněny před vstupem surové vody do membrány filtrace vody reverzní osmózou
4. TSS (Total Suspended Solid) musí být odstraněn před membránou komerčního systému čištění vody.
5. SDI (Silt Density Index) musí být menší než 3
6. Musíte se ujistit, že váš zdroj vody neobsahuje olej a mastnotu
7. Chlór musí být odstraněn před komerčním systémem úpravy vody
8. Dostupné elektrické napájecí napětí a fáze
9. Uspořádání místa pro komerční systém reverzní osmózy RO Provozní specifikace pro komerční systémy úpravy vody RO
TDS napájecí vody: 0 - 1000ppm
|
Tvrdost přes 18ppm Vyžaduje dávkování Antiscalant
|
Zákal musí být
Odstraněný
|
Max. Teplota napájecí vody: 42°C
|
Pracujte s vyššími výsledky TDS Nižší
Zotavení
|
H2S musí být
Odstraněný
|
Tolerance pH: 3-11
|
Max. Obsah železa: 0,05 ppm
|
|
Tlak napájecí vody: 1,5 až 6 bar
|
Max. Tolerance oxidu křemičitého: 60 ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.